Back in stock and shipping now!
Ship dates are not guaranteed* It can take extra time to get orders out depending on volume. We do our best, so please be patient. We DO NOT have any boards in stock at the Aspen store during the backorder. By ordering this item you acknowledge the estimated ship dates and understand there could be delays beyond them.
Anywhere you want to paddle the Flagship can take you there. Colorado has a wide range of paddling options and this model's design was driven with all those in mind. The Flagship effortlessly transitions from glassy high mountain lakes, to whitewater conditions to long floats on the mighty Colorado River. It handles chop like a champ and is also a popular option for those looking for a faster paddling board that is great for fitness. At 32 inches wide and 6 inches thick its more than capable of taking you, your dog, a cooler and your gear on epic adventures.
The Flagship is easy to inflate and deflate, simple to transport, no problem to store, and can be enjoyed by paddlers of all ages, sizes and skill levels.
The intricate graphic design of the Flagship uses a multi step digital printing process that delivers a stunning finished product. The artwork was done as a collaboration with Colorado artists Robert Maestas and Nathan Reese.
Check out the video section below to see our SUPs in action.
- Dual action hand pump with gauge, ergonomic handle
- 1 ankle leash
- upgraded 2 piece collapsible aluminum paddle - (lighter weight than paddle included with USS HS2 and Wolf models)
- 1 large composite removable 10" center fin with screw attachment
- 2 rubberized fixed side bite fins
- Upgraded heavy duty backpack with plush shoulder straps
- Repair kit includes valve wrench and patch material (does NOT include glue)
Frequently Asked Questions
Ordering and Shipping
When will I get my order?
We keep the website updated with estimated ship dates for boards that are on backorder. The dates will change as our supply is sold so the date you see when you make your order is correct. We are seeing a huge volume of orders and appreciate your patience!
Can I pick up from your Aspen showroom or the Denver warehouse?
All of our products ship directly out of our warehouse in Denver, so the most efficient way is for them to get shipped directly to you. Unfortunately, we cannot accommodate pickups at this time.
My billing and shipping addresses are not the same. Can you help?
Yes! Place your order through the website and use your billing address. You can shoot us an email to info@highsocietyfreeride.com with your order number and shipping address and we will get you updated!
What's the difference between all the boards?
The USSHS2 is the only board with different dimensions. It’s wider than the others. The rest of them are basically the same as far as dimensions go, but the price difference is dictated by the number of each model we produce (the more we make, the less they cost to make), the accessory package included, the graphics and other small details like number of D rings or type of fin box. All these factors are taken into consideration. All boards are part of a complete paddle package and come with the same 3 year warranty. They are all built with the same materials and attention to quality.
Does the paddle board come with a pump?
Yes. All boards come with a pump, paddle, backpack, fin, repair kit and strap to hold it together. All models EXCEPT THE ZG come with a 10 foot leash.
Which board is good for a beginner?
You really can't go wrong with any of these boards. The USSHS2 is the widest so the rider can get a little wider stance and possibly better balance, but all the SUPs are good for beginner to advanced paddler in most conditions.
Gear Questions and Tech
How much does the board weigh?
All the boards weigh just under 30 lbs, except the USS HS 2 which weighs 30.5 lbs.
How much does the whole package weigh?
The whole kit weighs about 42 lbs.
My pump gauge isn’t reading.
Most of the time, the gauge only begins to register when there is 7-8PSI in the board. The board will feel very firm at that point. I would suggest you keep pumping to see if it starts to register. If it still wont work, shoot us an email at info@highsocietyfreeride.com and we can help you out.
How firm should my SUP be?
Boards should be blown up to 15 PSI.
15PSI is more than it sounds like but necessary to get the board to its fullest potential. The last 5PSI are the hardest but go the quickest. The pump is dual-action, and you can use double-action till you get to 8psi then switch to single action to finish.
Do you sell an electric pump?
We do not sell an electric pump. This is the electric pump we use at the shop and so far we love it.
Do the paddles float?
No, our paddles are not made to float. They will float for a short amount of time when dropped in the water, but once they fill with water they will sink. If you want to ensure a floating paddle, you can put a small piece of pool noodle on the handle nearest the blade.
I broke my fin…
Fins are not covered by any sort of warranty. They are thin so they can break easily if you're not careful. Never put the board down on the ground, fins first if the long fin is installed. Be very careful in shallow water! When in doubt, take the middle fin out! You can get replacements from the website.
https://www.highsocietyfreeride.com/stand-up-paddleboards-cid-42
I busted a D ring!
Oh no! Luckily it’s an easy at-home repair.
Here is a link to the materials you'll need.
https://www.amazon.com/dp/B07S8SNM2G?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B005LL3ZXW?ref=ppx_pop_mob_ap_share
The D-rings come with easy to follow instructions. It's all about the clean and prep.
You'll need to mask off the work area around the D-ring well. Then use a little acetone or basic paint thinner to get the old material off. A green scrub pad helps to get the old glue off and will make the SUP material a little tacky and discolored-but that's what you want for good adhesion of the new glue. Spread some of the HH-66 glue on the D ring patch and position in place. It takes 48 for the glue to cure and then you can tie the bungee back on and be good as new.
Glue: HH-66 vinyl cement glue
D-Ring: YYSt D Ring patch for PVC inflatable SUP w/ stainless steel D ring.
My valve is leaking.
Check your valve for debris or any broken parts. If its all good, then use the valve tool from the orange repair kit to tighten the valve. All you need to do is line up the teeth and gently tighten (clockwise). That should take care of it. If not please let us know. The valves are installed by hand and can loosen up due to the pressure so they do need to be tightened from time to time.
Can I try one?
You bet! A few shops rent our boards:
Aspen, CO
Aspen bikes, replay sports, aspen whitewater, elk mountain expeditions
Breckenridge,CO;
Denver outdoor adventure company-
Montrose, CO
Sports Rewind
Carnation, WA
Carnation paddle sports
Grand Haven, MI
Amy Russell, Great Lakes ambassador
Highsocietyamy@gmail.com